Oakywood has  unveiled its MagSafe Collection  with pre-orders now being taken. The new line-up include the US$135 iPhone Stand (pictured) , $81 Apple Watch Stand, $81 iPhone Desk Shelf Mount, and the $72 iPhone Wall Mount. Here’s how the products are described: 

MagSafe iPhone Stand

Compatibility:all iPhone 12, 13, and 14 models as well as the original MagSafe charger

Dimensions: 8,1 x 10,4  x 13,9 cm

Composition: Wood (available in oak, walnut, black stained oak) and aluminum (matte black)

The MagSafe iPhone Stand is a multifunctional stand that revolutionizes the comfort of using the iPhone. The milled wooden backrest, inclined at an ergonomic angle, as well as a solid base allow for comfortable use of the iPhone. You can participate in a video conference without worrying about battery life and always have your phone within reach. More than just a stand, the design of the MagSafe iphone stand allows to pull out the magnetic charger holder and place it on the desk in a horizontal position. In this configuration, the metal holder effectively weighs down the charger and prevents it from sliding on the counter.

MagSafe iPhone Desk Shelf Mount

Dimensions: 5,3 x 8,2 x 7,5 cm

Compatibility:  All Apple Watch models and the original Apple Watch charger 

Composition: Wood (available in oak, walnut, black stained oak) and steel (matte black)

The MagSafe iPhone Desk Shelf Mount consists of a metal holder, compression bolt, wooden backrest, and a metal holder for the original MagSafe charger. The steel holder and the compression bolt make for a safe and stable base for the wooden backrest, a cohesive element in the entire collection. The brackets tilted at an ergonomic 25-degree angle serves as a connector between the leg and the holder, simultaneously allowing the cable to threaded through the back. The iPhone Desk Shelf Mount holder has been designed to fit all shelves to 3 cm thick.

MagSafe Apple Watch Stand

Dimensions: 5,3 x 8,2 x 7,5 cm

Compatibility:  All Apple Watch models and the original Apple Watch charger 

Composition: Wood (available in oak, walnut, black stained oak) and an aluminum(matte black)

The MagSafe Apple Watch boasts a wooden leg and an aluminum holder for the original Apple Watch charger and visually complements the MagSafe iPhone Stand.  The sturdy wooden leg serves as the base of the whole construction with a low set center of gravity to cultivate balance. 

MagSafe iPhone Wall Mount

Dimensions: 12,3 x 8 x 1,5 cm

Compatibility:  All iPhone 12, 13, 14 models as well as the original MagSafe charger

Composition: Wood (available in oak, walnut, black stained oak) and aluminum (matte black)

The MagSafe iPhone Wall Mount is designed to hold the charging device in an upright position, allowing for comfortable and functional use of the phone on a wall or other vertical surface. The wooden backrest includes a 3M self-adhesive tape which enables it to be safely mounted in a vertical position. The milled groove allows the cable to be threaded downwards. In turn, the metal holder is capable of picking up the excess heat from the charger  and its black coloring contrasts the wooden backrest and the white charger. MagSafe iPhone Wall Mount can also be mounted with a screw through the opening in the metal holder.




Article provided with permission from AppleWorld.Today