Site icon MacTech.com

ATTO Technology introduces XstreamCORE FC 7600 storage controller

ATTO Technology, Inc. has released the ATTO XstreamCORE FC 7600 storage controller.

ATTO XstreamCORE FC 7600 is a standalone, accelerated storage controller that connects any external SAS device, such as a JBOD of HDDs or SSDs, a RAID array or external tape devices, and presents them isolated to individual hosts or shared over a Fibre Channel SAN fabric.  

It sports ATTO xCORE hardware acceleration processor and ATTO intelligent Bridging Architecture designed to combine to keep latency low at three microseconds. The XstreamCORE FC 7600 enables up to 64 Fibre Channel connected clients to remotely access and share up to 240 SAS/SATA SSD or HDD devices via JBOD or JBOF at direct attached speeds with consistent, deterministic latency of less than three microseconds of added latency, according to Jim U’ren, products manager at ATTO.

Attached SAS LUNs are connected via four 12Gb wide lane SAS ports and mapped and presented via two 32Gb Fibre Channel ports as Fibre Channel targets.

Exit mobile version